what oil to use for tea leaf scented candle

At that place'south no such matter as an ugly bootleg candle.

I recently contributed a whole bushel of fun, holiday-themed crafts for a fabulous holiday gift guide that I tin't wait to spill the beans almost.  For one project, I used some lovely vintage vessels to make some really festive poured soy candles and they turned out so beautifully.

I had scooped a solid blue tea cup from the Good Neighbour Shed awhile back, simply didn't want to use information technology for the holiday guide considering tea cup candles take been washed to expiry.  But I couldn't resist making myself a DIY tea cup candle and I thought I'd share how I did information technology.  My Mom had some bergamot essential oil and information technology dawned on me that I could make a candle that smells like Earl Gray – my absolute favorite tea!  At the last infinitesimal I sprinkled in some real, loose leaf Earl Grey, just for show (it doesn't contribute to the scent), and the DIY earl grey tea loving cup candle turned out so adorably.

Candle making is quite the scientific discipline and everything – from the temperature of the wax to the temperature of the room – can bear upon the success of a poured candle.  I'd love to proceed practicing to perfect my technique, but even my showtime few tries resulted in successful candles.  Although they lack the smoothen as glass surface of commercial candles, they burn actually nicely!

Supplies for a DIY earl grey tea cup candle:

• Soy wax flakes (I bought a ten lb bag)
• Wicks (I bought these ones, which were easy to affix with a dab of glue)
• Hot glue gun (or wick stickers)
• Double boiler or candle making bullpen (I used an old Pyrex measuring cup in a pot of humid h2o)
• Candy or candle thermometer (I used a meat thermometer)
• Stir stick (an former wooden spoon or paint stir stick will exercise the play a trick on)
• Bergamot essential oil
• Tea cup!
• Pinch of loose leafage tea (optional)
• Oven mitts
• Newspapers or drib cloth

Steps for a DIY early grey tea cup candle:

The first step is to measure out the wax.  According to Candle Science, you lot can separate the book of your container in ounces by 16 to figure out how many ounces of wax flakes you demand to apply for ane container.  For this candle I used nearly 200g of wax flakes.  It shrinks quite a scrap once melted downwardly and while I was making a whole bunch of them, I would just melt as much as I could in my Pyrex loving cup.  And then, once it melts a flake and in that location's more than room, I would add more than flakes and go along melting.

With the wax measured, I started heating information technology up in my "double boiler".  I filled the pot with a few inches of water, which I brought to a boil and kept simmering the whole time.  The wax needs to reach 185F and that took about 30 minutes in my experience.  I stirred information technology occasionally and although some lingering chunks took awhile to melt, eventually it all melted and resembled olive oil.

While I waited, I used a hot glue gun to braze the wick.  You can as well buy "wick stickers" but I wanted to go along costs low and I had a mucilage gun on hand already!

Once the wax heated to 185F I let it absurd to nigh 135F earlier adding the essential oil.  Add it likewise early and it volition simply evaporate!  You lot can also purchase specialty candle fragrances.  More often than not folks tend to use approximately half an ounce of oil per pound of wax.  If you're buying a fragrance designed for candle making, there will be a usage guide on the label.  I've read a little chip online about essential oils and candles and there is a lot of disagreement near the amount required for a adept odor throw.  Some essential oils are stronger than others, and so you might need to experiment a little (and let me know how information technology goes!).

In one case it cooled to about 125F, I poured the wax into my cup, added a pinch of tea to the height (information technology sunk in a little fleck) and then allow the candle sit overnight.  I poured mine somewhere where it could be left, undisturbed, until information technology hardened.  The wax starts to harden actually quickly, turning from a yellow oil to a solid white substance, before your optics (if you're patient).  To keep the wick upright I created a grid with tape beyond the elevation, which trapped the wick upright but didn't keep information technology as taught as I would accept liked.  A better solution is to use a clothespin to clamp the wick end, and then identify that across the top – but I didn't have long enough clothespins (mine aren't the wood kind).  Some candle making guides say to warm up the vessel beforehand, only I skipped that step.  In one case the soy hardened completely, I trimmed the wick to 1/iv″.

I didn't add any dyes to my DIY earl gray tea loving cup candle so it looks like a really milky cup of tea, simply you could easily tint it tea-coloured with dyes made for candles.  Add together any dyes while the wax is at 185F so it can melt and mix completely.

This DIY earl grayness tea loving cup candle is adorable, correct?

I tin can now check "candle making" off the bucket list!

Dans le Lakehouse is a participant in the Amazon Services LLC Associates Programme, an affiliate ad program. If you click on a link that leads to Amazon, I may earn a commission on qualifying purchases - at no cost to you. Give thanks you for your support!

johnsonmistle1957.blogspot.com

Source: https://www.danslelakehouse.com/2015/10/diy-earl-grey-tea-soy-candle-cute-gift.html

Share this post